Inserting batteries
1. Open the battery compartment door and
insert 4 x size AA batteries as shown
in the picture.
2. Make sure the + and - battery contacts are
correctly inserted in the battery compartment.
3. Close the battery compartment door and
slide it back in place.
NOTE
It is recommended to use 4 batteries of the same brand and type, and replace them
all at the same time.
Wrong insertion of each battery would not make electric contact.
Before starting wireless flash shooting.
5
2
1
2
1
(*)
MG80 Pro has an energy saving power off function
To save battery energy, the screen of MG80 Pro display dims in about 30 seconds
and turns off in about 2 minutes automatically after the setting job is terminated.
While MG80 Pro is in the stand-by mode, a blinking signal will be shown on the Pilot
Button. To turn on MG80 Pro again, press any button on the Commander. In case of
not in use for over 60 minutes, MG80 Pro will be turned off completely. To turn on
MG80 Pro again, press Power button on the Commander.
