7
Basic Operation
Mounting a flash unit to the Air R is just like mounting a flash unit on
a camera.
1. Switch on both Air R and attached flash unit.
2. Set the flash unit to TTL mode and EV compensation
to zero.
3. All control will be done at NAS commander.
Mounting flash unit to the Air R
Removing flash from the Air R
Press the unlock button and slide the mounting
foot of flash off the hotshoe of the Air R.
Unlock button type as shown in the picture :
Unlock button type as shown in the picture :
Lock ring button type:
Lock ring button type:
Loosen the lock ring and slide the mounting
foot flash off the hotshoe of Air R.
Slide the mounting foot of flash into the hotshoe of
the Air R.
Make sure that the mounting foot will lock (with a
“click”) when it has been inserted completely.
1.
2.
2
1
1. Twist the lock ring anti-clockwise to loosen it.
2. Slide the mounting foot of flash into the hotshoe of Air R.
3. Twist the lock ring clockwise to tighten it.