background image

Thank you for purchasing a Nissin product

Before using this flash unit, please read this instruction manual and 
refer your camera owner’s manual carefully to get a better 
understanding of the proper operation to enjoy flash photography.

Nissin Di700A type Fujifilm is designed for Fujifilm digital SLRs, with the latest 
TTL flash control system. Please note that Di700A Fujifilm are not usable with 
other branded cameras for TTL operation.

Changes or modifications not expressly approved by  the 
party responsible for compliance could void the user's 
authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this
device must accept any interference received, including 
interference that may cause undesired operation.

Please refer Nissin’s compatibility chart shown at its home page for details and 

recent updates: http://www.nissin-japan.com or http://www.nissindigital.com

SPECIAL FEATURES

The Di700A features the use of a selector dial to quickly move through all settings 
and can be easily operated by one finger-tip.

The Di700A with wireless flash shooting using Nissin Air System/ radio 
transmission.
Flash protection function: 

When the red LED lamp starts blinking, it means that flash is overheating. 
The LED turns red when charging.
When the LED lamp turns green, the flash is charged and you can start to shoot.  

Compatible cameras

1

Remark:        

   Nissin Air System (NAS) is designed for Nissin flash and 

                         Nissin commander.

Summary of Contents for Di700A

























Reviews: