NJR4274
＊Above specifications are subject to change without notice.
Reference No.:
PDS-R4274
Rev.:
00-06E
Sheet:
12
Appedix)
WARNING:
The FCC regulations provide that changes or modifications not expressly approved by the party
responsible for compliance could void the user
’
s authority to operate the equipment.
Limitation for use of the modules:
When the module is installed in a host product, the module shall be connected directly to a PCB of
the host product. It shall NOT be extended by any cable. DC power supply for each module must
strictly be conformed to each electrical specification as described in the section 1 of this document.
Manual and Product Labeling information to the End User:
End user manual must include all required regulatory information and/or warning as show in this
manual.
OEM Integrator must indicate "Contain FCC ID: 2ACUJR4274" at the outside of a host product
such as label when the module is installed in the host product.
The following statement from FCC
§
15.19(a)(3) is required on the label of the host equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
OEM Integrator may be sure that the End user manual may not contain any information about the way
to install or remove the modules from the host product.
APPLICABLE MODEL:
This FCC Statement is valid only for the following model number:
NJR4274