![background image](http://html1.mh-extra.com/html/nissen/variosign-series/variosign-series_translation-of-original-operating-instructions_1695990021.webp)
© 2017 Adolf Nissen Elektrobau GmbH + Co. KG
Construction and function
Variable Message Sign
21
3.5.1
Main menu
OK!
or
???
indicates the status of the data connection
between the remote control and the system. If
OK!
is displayed, the
data connection has been established. If
???
is displayed, the data
connection is faulty. In the case of radio remote controls, the
symbol is replaced by
.
Indicates the battery voltage of the system.
Indicates the brightness of the variable message sign in %. In systems with a manual
dimmer, reference is also made to the status of the light-sensitive switch (automatic
or manual).
Battery symbol for remote controls with radio (Pro-Remote II). This symbol indicates
the status of the battery integrated in the remote control, each line that appears on
the symbol represents approx. 20% battery capacity. This value is also displayed
directly behind the symbol. An incremental symbol indicates that the battery is
charging. If the battery is indicated as a full symbol with 100% level, the charging
process is complete.
The
[F1]
key can be used to display information, e.g. program and version
number of the remote control and variable message sign. In the case of faults,
information on the type of fault is displayed here. In this case, the symbol flashes
(see also "Fault display").
The
[F2]
key is used to go to the "
Settings menu"
where the contrast, language, etc.
can be set (see also "Settings menu").
The
[F3]
key is used to switch the following functions on or off:
Dimmer function automatically/ manually, variable message sign on/off, advance
warning lamps on/off (optional), switching function (optional).
The
[F4]
key is used to switch the variable message signs on/ off (Standard-
Remote II)
or to allocate the individual variable message signs (Pro-Remote II).
"
Cancel function"
. This key can be used to cancel a selected function at any
time without any changes being made.
The right side of the image contains a schematic illustration of a variable message sign, for example,
and indicates the chosen symbol. The figures beside the scheme refer to the special keys which can
be selected. These are used for selecting e.g. warning signs, arrow position, lane regulation or
additional texts.
Special key
[S1]
leads to the submenu in which the requested symbol can be
selected. Special keys
[S2]
-
[S4]
are not occupied in this example.
The indication fields show the actual function of the corresponding special key below. After pressing
the requested special key the first eight preview images are indicated in the subsequent submenu.
The symbol/ text which is needed can be selected via corresponding function key or special key.
NOTE!
The symbols that are displayed vary according to the type of device and equipment!
Summary of Contents for VarioSign Series
Page 2: ......
Page 38: ......
Page 39: ......
Page 43: ...2017 Adolf Nissen Elektrobau GmbH Co KG Dimensions Variable Message Sign 43...