Installation with a circular filter
1. Place the circular filter on the front surface of
the adapter while turning anticlockwise with the
wheel held secure. Check that the filter is firmly
screwed in by rotating the filter clockwise. It
should rotate freely without coming loose.
4
4. Rotate the wheel and adjust the circular filter
to the desired configuration.
2. Install the adapter with the circular filter in
place (See page 11).
3. Place the two fixed points of the filter holder
onto the adapter securely and pull the knob.
Wheel
5. Insert the square or rectangular filter into
the clip and test it before shooting.
Check that the holder is securely installed by rotating it to and fro.
English
1
3
Fixed
point
Knob
2
5
