Image 2 (tower-position)
Image 3 (desk-position)
!
We recommend to assemble the product either on the carpet or on a cover material
laid on the
floor to avoid scratching of the product details.
The product must be assembled only by the adult. The product package includes small parts
(screws, woodel dowels). NEVER leave the screws and wooden dowels to the children’s reach,
small parts are a choking hazard for the child.
1.
Divide the details in the package into two parts: for the upper part and for the lower part as
shown on image 1:
- details of the upper part: 1A, 5, 6 and 7 (2 pcs);
- details of the lower part: 1, 2, 3 and 4 (2 pcs).
!
Make sure that details 1 and 1A are divided correctly. Detail 1A has three slots on the edge, but
detail 1 has two slots.
2. Place all the wooden dowels (12 pcs) on the side details (4 and 7) to the non-penetrating slots.
3. Connect details 1, 2 and 3 with the wooden dowels on detail 4:
Image 4
!
The laminate on our most exsclusive helper tower details is
different on both sides. The purpose for that is to provide extra
security for little ones. The surface with structured laminate is
less slippery. So during assembly be aware to place structured
side upwards on detail 2 (this is the step and the seat) and
downwards on detail 3. We recommend to place structured side
inside on detail 1, because then all smooth faces will be outside
on the whole helper tower.
