Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
65
(3)
When the adjustment is completed, the following screen appears. Press “OK” to
complete the adjustment.
(4)
Press “Exit” to return to the previous screen.
6.5.3.2 MANUAL ADJUSTMENT
Adjust the voltages manually.
(1)
Press “MANUAL ADJUST”.
(2)
An adjustment screen appears. Make an adjustment for “SPAN”.
Make an adjustment by changing each voltage gradually by one step at a time using the
up- and down-arrow buttons. The adjustment range is 0 to 255.
When each numerical button is pressed, it becomes possible to enter a value directly.
Enter an adjustment value and press “Enter” for determination.
Button
Description
Cancel
Cancellation of alteration
Clear
Deletion of all characters
Enter
Determination
BS
Deletion of one character
