4.8 How to remove the remained and jammed paper
(1) Turn OFF the power.
(2) In case of platen cover does not open because of the cutter getting out from the unit, turn
ON the power once and return cutter blade to the standby position.
(3) Press platen open lever and open bezel unit.
(4) Remove all of the paper on the path.
(5) Close the bezel unit. (Press the center part and close for sure.)
[CAUTION]
– Since thermal head right after printing will be highly heated, please beware not to touch
with your finger or hands etc.
– Please beware not to touch metal edge when platen arm is opened.
– Please press center part of platen arm when closing in order to prevent uneven clamping.
– Make sure not to apply excess angle when opening the head arm.
– Please beware not to clamp your finger or hands etc.
Platen Open Lever
Bezel Unit
D-F10072 NP-K3053/K2053 Product Specifications Rev.1.00
28
