Nio ES6 2022, Manual

Page: 312 / 395

Add Fluid
Add Windshield Washer Fluid
The windshield washer fluid is used to maintain good visibility through the
windshield. The steps to add the windshield washer fluid are as follows:
1. Open the washer fluid cover and the cap, and add appropriate amount of
washer fluid (it is recommended to stop adding when the fluid inside is about
to reach the inlet).
Caution
When topping up the windshield washer fluid, please fill the reservoir carefully
to avoid spilling and wipe up any spills immediately.
2. After adding the fluid, close the cap and the washer fluid cover.
Add Coolant
Warning
To avoid the risk of high voltage electric shock when opening the hood, please
contact NIO to top up the vehicle’s coolant.
The coolant maintains a proper temperature range for the operation of the vehicle
power system. The steps to add coolant are as follows:
1. Open the front hood handle cover in the passenger compartment (1 in the
Figure), pull the front hood release cable to release the front hood (2 in the
Figure).
Maintenance and Cleaning
310