•
Do not place the AC adapter or cord near stoves or heaters.
•
Do not use so that the cord (especially near the base of the cord) is subjected to
excessive force.
•
For safety, always unplug the AC adapter from the outlet if it will not be used for a long
period of time. Store the AC adapter out of the reach of children.
•
Do not modify or damage the AC adapter or cord.
•
If the AC adapter seems loose in the outlet, a short may be caused in the plug if a metal
object (such as a clip) accidently falls. When plugging in the AC adapter, plug it firmly
into the outlet with the cord on the bottom. If it is plugged in with the cord on top, it is
susceptible to coming loose.
•
Do not alter, disassemble, or try to repair.
•
Periodically clean any dust that accumulates on the AC adapter plug using a soft cloth.
(10)
5. Installation
This product is used for information services that use wireless communication, such as
“Nintendo Zone”. The following are also required in order to use these services.
Devices other than this product required to use the “Nintendo Zone” service
•
Broadband Internet environment
•
Wireless LAN access point
•
Nintendo DS Series Game System
After verifying the following, install in an appropriate location.
Note: When mounting on a wall, see “5. Installation” -> “Mounting on a Wall.”
Locations appropriate for Installation
•
Locations that are unobstructed
•
Locations that avoid inadvertent contact (such as under counters)
•
Near wireless LAN access points
•
Locations that can be easily monitored by store employees or installation managers
(11)
Mounting on a Wall
Perform the procedures below when mounting this device on a wall.
Note: Please firmly mount this device to a wall strong enough so that it will not fall.
Note: Mount this device where there is a nearby outlet to plug the AC adapter in directly.
Note: If you must use an extension cord because there is no outlet nearby, firmly fix the AC
adapter so that it will not easily come unplugged and ensure the cord remains flat.
1. Check the direction of the “Wall mounting resin plate” so that the arrow points in the direction
of the device and then secure the device to the plate with the screws. Use the two included Pan
head screws (M4x6) and attach the device firmly so that it does not come loose. (See Image 1.)