8
9
0800 862 0453
www.ninjakitchen.eu
Using the Ninja Ultima
™
Dual Stage Blender
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING
THE APPLIANCE:
IMPORTANT:
When using the top blades,
always add the ingredients into the
blender
AFTER
inserting the top blades.
CAUTION:
Blades are sharp! Use extreme
caution when handling the top blades.
Always hold them by the shaft.
IMPORTANT: DO NOT
attempt to
operate the appliance without the lid on.
IMPORTANT:
Never run the appliance
empty.
CAUTION: DO NOT
process food or
liquids that are hot. Allow hot ingredients
to cool before processing.
WARNING:
Secure the appliance while in
use by pressing down on the lid with one
hand.
CAUTION:
Never remove either container
or try to remove the lid from the pitcher
while the appliance is still running.
WARNING:
Never leave the appliance
unattended while in use.
Fig. 3b
Fig. 2
Fig. 1
Assembly and Use for the 2.1 L Pitcher
IMPORTANT:
Make sure that the motor
base is plugged in for use.
1
Place the motor base on a clean, dry, level
surface such as a counter or table top.
2
Align and lower the pitcher onto the motor
base. (
Fig. 1
) Handle should be aligned
slightly to the right of the “
LOCK
” symbol on
the motor base.
3
Rotate the pitcher clockwise as far as it will
go to lock in place. (
Fig. 2
)
NOTE
: The pitcher can be placed on the motor
base two ways; the handle can be on the front
right corner or the front left corner. (
Fig. 3a,
Fig. 3b
)
4
Holding the top blades by the top of the shaft,
place it onto the bottom blades inside the
pitcher. Ensure that the top blades are seated
properly by standing upright in the pitcher. Do
not operate the unit if the top blades are not
upright at any time. (
Fig. 4
)
NOTE
: The top blades will fit loosely on the
bottom blades but will be secured once the lid
is in place.
TIP:
When pureeing, use only the bottom
blades for best results.
NOTE:
The bottom blades are not removable.
5
When using the top blades, ensure blades are
properly in place prior to adding ingredients.
Add the ingredients to the pitcher, making
sure that they do not exceed the 2.1 L mark on
the pitcher.
NOTE
: When blending any kind of liquids,
such as mixtures of any drinks or smoothies,
do not exceed the “MAX LIQUID” mark (1.8 L)
on the pitcher.
NOTE
: If you need to add additional
ingredients while the appliance is processing,
do not remove the lid. Open the pour spout
cap and add any additional ingredients, close
cap when complete.
6
Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning
the arrow ( ) located on the lid with the
arrow ( ) located on the pitcher’s handle.
(
Fig. 5
) Press the handle down until you hear
a click.
Fig. 4
Fig. 5
Assembly
Fig. 3a
BEFORE FIRST USE
1
Remove all packaging material and labels
from the appliance.
2
Wash the lids, pitcher, single serve cups and
top blades in warm, soapy water with a soft
cloth.
Use caution when washing the
removable top blades as the blades are
very sharp.
Rinse and dry thoroughly.
OR
3
All accessories are dishwasher safe except
the motor base. When using the dishwasher,
place the pitcher and single serve cups in the
dishwasher. Place the lids and attachments
on the top rack.
Use caution when washing
the removable top blades as the blades
are very sharp
. Always hold the top blades
from the shaft.
4
Wipe the motor base clean with a damp cloth.
Do not submerge the motor base in water or
any other liquid.
