24
25
ninjakitchen.eu
TRADITIONAL BLENDING
WITH YOUR SINGLE-SERVE FRESHVAC™ CUP
IMPORTANT:
Review all warnings
on pages 4–7 before proceeding.
2
Place the Pro Extractor Blades®
Assembly on the top of the cup
and turn clockwise to seal.
1
Add ingredients to the FreshVac
Cup.
DO NOT
add ingredients past
the
MAX LIQUID
line on the cup.
3
Place the unplugged motor base
on a clean, dry, level surface
such as a worktop or table. Press
downward on the motor base to
adhere the suction cups to the
work surface. Plug the motor
base into a socket.
4
Turn the Single-Serve Cup upside
down and install on the motor base.
Align the tabs on the cup with the
slots on the base, then twist until it
clicks into place. Touch the Power
symbol to turn unit on. The available
program buttons will illuminate and
the unit will be ready for use.
5
If using a pre-set program, first
select the program that best suits
your recipe. The pre-set feature will
automatically stop the unit at the end
of the program. To pause the unit at
any time, touch the currently active
program a second time. Reference
page 10 for program descriptions.
7
Turn cup over so blade assembly
is on top. Rotate blade assembly
anti-clockwise to remove. To take
your blended contents on the go,
place the spout lid on cup and turn
clockwise to seal.
8
Unplug the unit when finished. To lift
the motor base, place your hands
underneath both sides of it and
gently pull the unit up and toward
you. Refer to the Care & Maintenance
section for storing instructions.
6
When blending is complete, rotate
cup anti-clockwise to remove from
motor base and place cup on a
level surface. Pressure must be
released before opening the cup.
The FreshVac™ Cup may be stored
in the refrigerator with the spout
lid for later use.
DO NOT
store
contents in the cup with the Pro
Exactor Blades® Assembly attached.
