IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL
APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR NINJA
™
PROFESSIONAL BLENDING SYSTEM.
POLARIZED PLUG
WARNING:
To reduce the risk of
electric shock, this appliance has a
polarized plug (one blade is wider
than the other). This plug will fit into
a polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician to
install the proper outlet.
DO NOT
modify the plug in any way.
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
1. To protect against electrical shock, do not
submerge the blender or allow the power
cord to come into contact with water or
any other liquid.
2. Close supervision is necessary when any
appliance is used by or near children.
3. Never leave an appliance unattended
when in use.
4. Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from
the electrical outlet. Never pull from the
power cord.
5.
DO NOT
abuse the power cord. Never
carry the appliance by the power cord
or yank it to disconnect from electrical
outlet; instead grasp the plug and pull to
disconnect.
6.
DO NOT
operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to EURO-PRO
Operating LLC for examination, repair or
adjustment.
7.
DO NOT
let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
8. Always use appliance of a dry, level
surface.
9. Keep hands, hair, clothing, as well as
utensils out of container while blending to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper
may be used but only when the blender is
not running.
10.
CAUTION:
Blade assembly is sharp,
handle with care. When handling the
blade assembly, always hold by the shaft.
11. Avoid contact with moving parts.
12.
DO NOT attempt to sharpen blades.
13.
DO NOT
use the appliance if blade
assembly is bent or damaged.
