Ninja Kitchen System Pulse BL200NZ, Owner'S Manual

Page: 9 / 20

8
CUSTOMER CARE - AU: 1800 890 840
5
Wipe the motor base clean with a damp cloth.
IMPORTANT:
Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Add ingredients to the single serve cup.
3 Place the single serve blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
4
Turn the single serve cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Turn to the left, the unit is ready for use.
(Fig. 2)
5
Press down on the top of the cup in short intervals to
activate. (Fig. 3)
Fig. 1
Fig. 2
Assembly and Use for the Single Serve Cup
Fig. 3
Fig. 4 Fig. 5
ASSEMBLY PULSE REMOVAL
6
When you have reached your desired consistency, stop
the appliance by removing your hand from the single
serve cup. Then turn the single serve cup to the right
(Fig. 4)
and pull straight up to remove.
(Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
7 Turn the cup upright and remove the single serve blade
by twisting the blade assembly anti-clockwise.
8 Place the To-Go drinking lid onto the single serve drink
cup, twist to seal and enjoy!
9
Make sure that the motor base is unplugged when not in
use.
For best results, use short “ PULSES ”... Practice makes perfect!!