background image

19

ninjakitchen.com

18

ninjakitchen.com

USING THE XL SMOOTHIE BOWL MAKER

 Plug in motor base and place on a clean, 

dry, level surface such as a countertop  

or table.

2  

Add ingredients to the XL bowl. 

DO NOT

 

add liquid past the

 LIQUID

 

FILL 

line or 

ingredients past the 

MAX FILL

 line.

3  

Place the Hybrid Edge™ Blades Assembly 

on the top of the bowl and turn clockwise 

to seal.

4  

Turn the XL bowl upside down and install 

on motor base by aligning the tabs on 

the bowl with the slots on the base. 

Then, rotate bowl clockwise until it clicks. 

Once locked in place, press the Power 

button to turn unit on. The available 

program buttons will illuminate and the 

unit will be ready for use.

IMPORTANT:

 

Review all warnings on 

pages 4–7 before proceeding.

 

5a  

If using an Auto-iQ program, use the dial 

select the program that best suits your 

desired output, then press START/STOP. 

During the blending process, ensure to 

twist the built-in tamper 

counterclockwise 

continuously. The preset feature will 

automatically stop at the end of the 

program. To stop the unit at any time, 

press START/STOP.

5b    

For Manual mode, press IQ/MANUAL. With 

speed 10 on the display, press START/STOP. 

During the blending process, twist the built-in 

tamper 

counterclockwise

 continuously. Once 

the ingredients have reached your desired 

consistency, press START/STOP and wait for 

the unit to come to a complete stop. 

6  

Remove the XL bowl from the motor 

base by turning it counterclockwise and 

then lifting up.

7  

Remove the blade assembly by twisting 

counterclockwise. 

DO NOT 

store blended 

contents with the blade assembly 

attached. Only use the spout lid or 

storage lid to cover. Exercise care when 

handling the blade assembly, as the 

blades are sharp.

9  

Turn the unit off by pressing the Power 

button. Unplug the unit when finished. 

Refer to the Care & Maintenance 

section for cleaning and storage 

instructions.

NOTE: 

If the unit is plugged in and powered 

on, but the XL bowl and blade assembly is 

not properly installed, the timer will display 

- -” and the motor will be disabled.

NOTE: 

While processing, twist the built-in 

tamper 

counterclockwise

 continuously.

NOTE: 

Only speed 10 is available when 

using the XL bowl.

8  

To enjoy on the go, place the spout lid 

or storage lid onto the bowl and twist 

lid clockwise until firmly sealed.

USING THE XL SMOOTHIE BOWL MAKER

Summary of Contents for FOODI SS400 Series
















Reviews: