22
23
USING THE
AIR FRY/STOVE TOP FUNCTIONS -CONT
Yoghurt
1
Add desired amount of milk to the pot.
2
Close the lid.
3
Move slider to AIR FRY/STOVE TOP, then
use the dial to select YOGHURT. The
default temperature setting will display.
Use the up and down arrows to the left
of the display to select "YGt" or "FEr."
4
Use the up and down arrows to the right
of the display to adjust the incubation
time in 30-minute increments between
6 and 12 hours.
5
Press START/STOP to begin pasteurisation..
6
Unit will display "boil" while pasteurising.
When pasteurisation temperature is
reached, the unit will beep and display
"COOL".
7
Once the milk has cooled, the unit will
display ADD and STIR in succession and
the incubation time.
NOTE:
Selecting a longer time will
lead to tangier yoghurt with a thicker
consistency. Use 12 hours to achieve
Greek-style yoghurt.
NOTE:
If you prefer to pasteurise, cool
and add cultures not using the unit,
skip steps 1–9. Instead, press TEMP,
select "FEr," press TIME, select desired
incubation time, then press START/STOP
to begin.
8
Open the lid and skim the top off
the milk.
9
Add yoghurt cultures to milk and stir
to combine. Close the lid and press
START/STOP to begin incubation
process.
10
The display will show "FEr" and will begin
counting down. When incubation time
is complete, the unit will beep and END
will flash 3 times on the display. The unit
will beep each minute for up to 4 hours
or until powered off.
11
Chill yoghurt for up to 12 hours
before serving.
+
+
AIR FRY / STOVE TOP
YOGHURT
Cleaning: Dishwasher & Hand-Washing
The unit should be cleaned thoroughly
after every use.
1
Unplug the unit from the wall socket
before cleaning.
2
To clean the cooker base and the
control panel, wipe them clean with
a damp cloth.
3
The cooking pot, silicone ring, reversible
rack, Cook & Crisp™ Basket and
detachable diffuser can be washed in
the dishwasher.
4
The pressure release valve and anti-clog
cap, can be washed with water and
dish soap.
5
If food residue is stuck on the cooking
pot, reversible rack or Cook & Crisp™
Basket, fill the pot with water and allow
to soak before cleaning.
DO NOT
use
scouring pads. If scrubbing is necessary,
use a non-abrasive cleanser or liquid dish
soap with a nylon pad or brush.
6
Air-dry all parts after each use.
Removing & Reinstalling
the Silicone Ring
To remove the silicone ring, gently pull
it outward, section by section, from the
silicone ring rack. The ring can be installed
with either side facing up. To reinstall, press
it down into the rack section by section,
(see image above).
After use, remove any food debris from
the silicone ring and anti-clog cap.
Keep the silicone ring clean to avoid odour
Washing it in warm, soapy water or in the
dishwasher can remove odour. However,
it is normal for it to absorb the smell of
certain acidic foods. It is recommended
to have more than one silicone ring
on hand. You can purchase additional
silicone rings at ninjakitchen.com.au or
ninjakitchen.co.nz.
NEVER
pull out the silicone ring with
excessive force, as that may deform it and
the rack and affect the pressure-sealing
function. A silicone ring with cracks,
cuts or other damage should be
replaced immediately.
NOTE:
NEVER
put the cooker base in
the dishwasher or immerse it in water
or any other liquid.
NOTE:
The silicone ring must be replaced
by one that is specific to a Foodi®
SmartLid Multi-cooker.
Silicone Ring
Silicone
Ring Rack
CLEANING & MAINTENANCE
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz