10
11
SG
ninjakitchen.sg |
MY
ninjakitchen.my
SG
+65 800 120 5111 |
MY
+60 1800 803 915
GETTING STARTED WITH YOUR BLENDER
ASSEMBLING THE HEATED BLENDER
1
Plug in motor base and place on a clean, dry,
level surface such as a countertop or table.
2
Lower the pitcher onto the motor base.
6
To remove the lid from the pitcher, rotate
lid counterclockwise out of the lock
position and lift up.
3
Add ingredients, making sure to not exceed
the max fill lines on side of pitcher. In COOK
or INFUSE modes, DO NOT exceed the level
labelled “SOUP.” In BLEND mode, DO NOT
exceed the level labelled “COLD.”
MANUAL SETTINGS
MANUAL BLEND
Manual Blend speeds give you ultimate
control over your blend.
1
To begin, press the Power button.
2
Choose BLEND to unlock speed options.
3
Select LOW, MED, HIGH or PULSE to
begin blending.
MANUAL COOK
Manual Cook settings puts the control in
your hands.
1
To begin, press the Power button.
2
Choose COOK to unlock temperature options.
3
Select LOW, MED or HIGH to begin cooking.
4
Timer will count up to 60 seconds or until
manually stopped.
NOTE:
You can press PULSE during Manual
Cook mode to gently stir ingredients.
NOTE:
The unit will beep 3 times to alert
you the program is going to stir ingredients.
Make sure centre cap is secure during use.
NOTE:
After heated programs, steam may
release as the lid is removed. Keep hands
on the outer tabs and lift directly up.
NOTE:
For best results, quickly PULSE
ingredients periodically during cooking to
distribute heat and promote even cooking.
NOTE:
The Pulse setting will run only
when the PULSE button is pressed.
AUTO-IQ PROGRAMS
1
To begin, press the Power button.
2
Press the program of your choice from
the CRUSH, COOK or INFUSE sections.
3
The Heat On light will turn on if the
selected program uses heat.
TIP:
When making thicker recipes such
as ice creams and dips, use the tamper
to push ingredients toward the blades.
Tamper should be used only when lid is
attached to pitcher. Remove centre cap
and replace with tamper.
Cold line
(1.6 L)
Soup line
(1.4 L)
4
To install the lid on the pitcher, place the
lid tab to the right of the handle. Press the
lid down until it is secure. Rotate the tab
clockwise so the arrow on the lid tab aligns
with the arrow on the pitcher handle.
5
Secure the centre cap by placing it down
into the lid and twisting clockwise until
it clicks into place.
IMPORTANT:
Review all warnings on
pages 4–5 before proceeding.
