7
8
www.ninjakitchen.com
1-877-646-5288
Using the Ninja
®
Express Chop
™
Shaft
Fig. 1
Fig. 2
Fig. 4
Open Flap
Fig. 3
1 Review warning and caution statements on page
6 before proceeding.
2
Place the processing bowl on a clean, dry, level
surface.
3
Holding the Ninja
®
Chopping Blade Assembly by the
shaft, carefully place it over the spindle pin inside the
processing bowl.
(Fig. 1)
WARNING: DO NOT try to place the Chopping
Blade Assembly onto the power pod and then
into the Ninja
®
processing bowl. (Fig. 3)
IMPORTANT: Always assemble the Chopping
Blade Assembly inside the container.
4
Carefully spin the blade assembly counter clockwise to
make sure that blade assembly has inserted properly.
(Fig. 2)
5
Place the food ingredients into the bowl.
CAUTION: DO NOT add more than 16 oz. dry or 8
oz. liquid ingredients as this may cause overflow.
IMPORTANT: Never add ingredients into the
processing bowl before placing the blade
assembly in first.
6
Place the splashguard / storage lid on the bowl.
(Fig. 4)
7
Open the flap on the splashguard.
(Fig. 4)
15
If the ingredients stick to the side of the processing
bowl, stop the appliance, remove the power pod and
the splashguard. Use a spatula to dislodge the pieces
and then replace the splashguard and the power pod.
Continue processing.
16
Remove the Ninja Chopping Blade Assembly by its shaft
before you empty the contents of the processing bowl.
17
Place the storage lid onto the top of the processing
bowl and close the flap to store.
(Fig. 7)
HINTS & TIPS FOR USING YOUR NINJA
®
EXPRESS
CHOP
™
• For mincing, chopping and pureeing, increase the
length of pulses.
• For coarse chopping, use short, quick pulses and
monitor food texture.
• Pre-cut larger pieces to make them fit into the
processing bowl. When chopping hard foods cut into
2.54 cm cubes.
8 Review warning and caution statements on page
6 and 7 before proceeding.
9
Place the power pod on top of the splashguard making
sure that it is securely in place.
(Fig. 5)
10
To start the appliance, plug the power cord into
the electrical outlet, securely hold power pod while
operating and press on the on/off pulse button located
on the top of the power pod.
(Fig. 6)
11
Hold the processing bowl firmly while depressing the
on/off pulse button to ensure the unit stays in place.
NOTE: DO NOT
operate the appliance continuously for
more than 15 seconds at a time. Be careful not to over
process. For coarsely chopped foods, use repeated
short pulsing action until the desired consistency is
reached.
12
To stop the appliance, remove your fingers from the
On/Off pulse button.
13
In order to obtain a better quality of chopping, operate
the appliance by using the “pulse” method.
14
Make sure that the Ninja Chopping Blade Assembly has
stopped completely before removing the power pod.
Fig. 5
Fig. 6
Fig. 7
