ENGLISH
14
15
1-877-646-5288
ninjakitchen.com
BREWING
CUSTOM BREWS
CLASSIC BREW & RICH BREW
1
After filling the water reservoir, place
either the COFFEE or TEA filter holder
into the brew basket. Add the ground
coffee, loose leaf tea, or tea bags
to the filter.
2
Close the brew basket, ensuring it is
securely in place. The control panel will
display either COFFEE
(Fig. 14a)
or TEA
(Fig. 14b)
settings based on the filter
holder that has been inserted.
3
Use the Multi-Serve dial to select the brew
size. Place the empty vessel you would like
to brew into under the brew basket.
4
Turn the START/DÉMARRER dial to
choose either Classic Brew or Rich Brew
(Fig. 15a, Fig. 15b)
. If brewing tea, press the
Tea button to toggle to the tea menu,
and use the dial to choose your tea type.
To change your brew style while in the tea
menu, press the Tea button again.
5
Press the START/DÉMARRER dial to start
the brew. A progress bar on the control
panel will show the status of the brewing
cycle. To cancel the brew at any time, press
the dial again or press the Power button.
6
The unit will beep and the clock will
display End when the brew is complete.
NOTE:
Some brews have a
pre-infusion cycle with varying times.
The brewing cycle will begin, then
there will be a pause for a short period
before resuming. This process is used
to evenly saturate the coffee grounds
or tea.
NOTE:
If making a single cup, lower the
Single-Serve Cup Platform and set your
vessel in the center of it. Please ensure
you are using at least a 355 ml cup for
the Cup size, 414 ml cup for the XL Cup
size, 473 ml. travel mug for the Travel
Mug size, and 591 ml travel mug for the
XL Multi-Serve size.
NOTE:
Rich Brew will use slightly less
water and yield slightly less brewed
coffee or tea than Classic Brew.
NOTE:
If the brew basket is closed with
no filter holder in place, both COFFEE
and TEA will flash.
Fig. 15b
Fig. 15a
Fig. 14b
Fig. 14a
Fig. 16a
Fig. 16b
PREPARING & USING
THE NINJA
HOT & COLD BREW SYSTEM™ – CONT.
4
Turn the START/DÉMARRER dial to
choose either Over Ice Brew or Cold
Brew
(Fig. 16a, Fig. 16b)
. If brewing tea,
press the Tea button to toggle to the
tea menu, and use the dial to choose your
tea type. To change your brew style while
in the tea menu, press the Tea button .
5
Press the START/DÉMARRER dial to start
the brew. A progress bar on the control
panel will show the status of the brewing
cycle. To cancel the brew at any time, press
the dial again or press the Power button.
6
The unit will beep and the clock will
display End when the brew is complete.
OVER ICE BREW & COLD BREW
NOTE:
Glassware may be used with
the Cold Brew setting, but not the
Over Ice Brew setting.
1
After filling the water reservoir, insert
either the COFFEE or TEA filter holder
into the brew basket. Add the ground
coffee, loose leaf tea, or tea bags to
the filter.
2
Close the brew basket, ensuring it is
securely in place. The control panel will
display either COFFEE
(Fig. 14a)
or
TEA
(Fig. 14b)
settings based on the
filter holder that has been inserted.
3
Fill your desired vessel to the top with
ice cubes and place the vessel below the
brew basket. Use the Multi-Serve dial to
select the brew size.
NOTE:
For COLD BREW coffee
ONLY
,
add an additional scoop of coffee
grounds to the brew basket.
NOTE:
Cold Brew takes about
15 minutes for a Full Carafe.
NOTE:
DO NOT
add ice to the
water reservoir.
