Ninja CB352SM, Owner'S Manual

Page: 12 / 76

12 SG
+65 800 120 5111 |
MY
+60 1800 803 915
6a If using an Auto-iQ program, use the dial
to select the program that best suits your
desired output, then press START/STOP.
The preset feature will automatically stop
at the end of the program. To stop the unit
at any time, press START/STOP.
6b For Manual mode, press IQ/MANUAL.
Use the dial to select your desired
speed, ranging from 1 to 10, and press
START/STOP. Once the ingredients have
reached your desired consistency, press
START/STOP, and wait for the unit to
come to a complete stop.
7
Remove the pitcher from the motor base
by turning it counterclockwise and then
lifting up.
8a
To pour out thinner mixtures, ensure the
lid is locked in place, then open the pour
spout cap.
8b
For thicker mixtures that cannot be
emptied through the pour spout, remove
the lid and Stacked Blade Assembly before
pouring. To remove the lid, press the
RELEASE
button and lift the handle. To
remove the blade assembly, carefully grasp
it by the top of the shaft and pull straight
up. The pitcher can then be emptied.
9
Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
USING THE POWER BLENDER & PROCESSOR PITCHER
& STACKED BLADE ASSEMBLY – CONT.