9
10
0800 862 0453
www.ninjakitchen.eu
9
Select the speed that best suits your needs. (
Fig. 6
)
NOTE:
Pulse ingredients for even blending by pressing
down in short intervals.
10
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the attachment to stop turning.
(Fig. 7
)
11
To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base. (
Fig. 7, Fig. 8
)
Assembly and Use for the 2.1L Pitcher - cont.
Fig. 7
USE
REMOVAL
Fig. 6
Fig. 8
CAUTION:
Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge food
that has stuck to the sides of the pitcher.
12
Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents. For thicker consistencies,
remove the lid and attachment carefully (by its shaft),
then empty contents from the container.
13
Make sure that the unit is unplugged when not in use.
IMPORTANT:
Make sure that the motor base is
plugged in for use.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Add ingredients to the single serve cup.
3
Place the single serve blade onto the cup and screw it
tightly until you have a good seal. (
Fig. 1
)
4
Turn the single serve cup upside down and place it onto
the motor base, aligning the tabs on the cup with the motor
base. Turn the single serve cup clockwise. (
Fig. 2
) Turn
the power button on, the single serve button will illuminate.
5
Press down on the Single Serve button in short
intervals to activate.
(Fig. 3
)
Fig. 1
Fig. 2
Assembly and Use for the Single Serve Cup
Fig. 3
Fig. 4
Fig. 5
ASSEMBLY
USE
REMOVAL
6
Once you have reached your desired consistency, turn
the power button off. Turn the single serve cup counter
clockwise and pull straight up to remove. (
Fig. 4
,
Fig. 5
)
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
7
Turn the cup upright and remove the single serve blade
by twisting the blade assembly clockwise.
8
Place the To-Go drinking lid onto the single serve drink
cup, twist to seal and enjoy!
9
Make sure that the motor base is unplugged when not
in use.
For best results, use short
“PULSES”
... Practice makes perfect!!
