10
AUST: 1800 890 840
NZ: 0800 002 999
IMPORTANT:
Make sure that the motor base is
plugged in for use.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Add ingredients to the single serve cup.
3
Place the single serve blade onto the cup and screw it
tightly until you have a good seal. (
Fig. 1
)
4
Turn the single serve cup upside down and place it onto
the motor base, aligning the tabs on the cup with the motor
base. Turn the single serve cup clockwise. (
Fig. 2
) Turn
the power button on, the single serve button will illuminate.
5
Press down on the Single Serve button in short
intervals to activate.
(Fig. 3
)
Fig. 1
Fig. 2
Assembly and Use for the Single Serve Cup
Fig. 3
Fig. 4
Fig. 5
ASSEMBLY
USE
REMOVAL
6
Once you have reached your desired consistency, turn
the power button off. Turn the single serve cup counter
clockwise and pull straight up to remove. (
Fig. 4
,
Fig. 5
)
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
7
Turn the cup upright and remove the single serve blade
by twisting the blade assembly clockwise.
8
Place the To-Go drinking lid onto the single serve drink
cup, twist to seal and enjoy!
9
Make sure that the motor base is unplugged when not
in use.
For best results, use short
“PULSES”
... Practice makes perfect!!
Summary of Contents for BL770NZ
Page 1: ...Mega Kitchen System OWNER S GUIDE BL770NZ...
Page 17: ...16 NZ 0800 002 999 Notes...
Page 18: ...17 AUST 1800 890 840 Notes...
