12
www.sharkninjamanuals.com
Fig. 1
WARNING:
Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the cutting discs as they are very sharp.
IMPORTANT: Use only the LOW/DOUGH setting when using either disc.
Assembly and Use for the Cutting Discs
USING THE DISCS
NOTE: Cutting Discs must be used with the feed
chute lid.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
(Fig. 1)
2
Secure the bowl onto the motor base.
3
Place the spindle inside the bowl.
4
Use the finger holes to grasp the selected disc and
place it over the spindle.
5
Place the feed chute lid on the bowl and turn clockwise
until you hear a click indicating the lid is locked in
place.
(Fig. 1)
6
Plug the power cord into the electrical outlet and press
up on the power toggle ( ) to turn the power “On”.
7
Select LOW/DOUGH on the control panel. The discs will
begin spinning.
8
Add the food that you want to slice, shred or grate
through the feed chute on the lid. (
Fig. 1
) Use the
two-part food pusher to help guide the food through
the feed chute. The middle piece of the food pusher is
removable to use for smaller ingredients.
9
When finished,stop the appliance by pressing the power
button ( ) and wait for the disc to stop turning. Press the
button on the feed chute lid located near the handle to
unlock and turn the lid anticlockwise. Lift to remove from
the processor bowl. Using the finger holes, carefully lift
the disc out of the bowl and remove the spindle.
10
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
