15
ninjakitchen.com
14
ninjakitchen.com
8
Plug the power cord into the electrical
outlet and press the power button ( ).
9
Select the speed that best suits your
needs. Pulse ingredients evenly by
pressing down in short intervals.
10
When you have reached your desired
consistency, stop the appliance by
pressing the power button ( ) and
wait for the blade to stop turning.
11
To remove the lid, pull the lid handle up
to a 90° angle and lift the lid off. Turn
the bowl counterclockwise and then lift
off the base.
USING THE PROCESSOR BOWL
1
Place the motor base on a clean, dry, level
surface such as a counter or table top.
2
Align and lower the Bowl onto the
motor base. Handle should be aligned
slightly to the right of the LOCK symbol
on the motor base.
3
Rotate the bowl clockwise until you hear
a click, you will hear a click when the
lock is engaged.
IMPORTANT:
Review all warnings on
pages 4–7 before proceeding.
IMPORTANT:
As a safety feature, the
power button ( ) will flash and the
motor will not work if the bowl and lid
are not installed correctly. When the
bowl and lid are installed properly, the
power button ( ) will be solid, indicating
that the appliance is ready for use.
4
The bowl can be placed on the motor
base two ways; the handle can be on the
front right corner or the front left corner.
5
Holding the desired blade assembly by
the top of the shaft, place it onto the
drive gear inside the bowl. Ensure that
the blade assembly is seated properly
and is standing upright.
6
Add the ingredients to the bowl, making
sure that they do not exceed the highest
measured marking line on the side of
the bowl.
7
Holding the lid by the handle in the
upright position, place it on top of the
bowl aligning the arrow ( ) located on
the lid with the arrow ( ) located on the
bowl’s handle. Press the handle down
until you hear a click.
NOTE:
The blade assembly will fit loosely
on the drive gear.
NOTE:
To add liquids during blending,
open the drizzle hole on the top of the
lid and pour the liquid slowly into
the mixture.
NOTE:
DO NOT
exceed the highest
measured marking line on the side of the
bowl. For meats do not exceed 34 oz
bowl mark.
NOTE:
Please refer to “Speed Settings
& Uses” chart for suggested uses
and speeds.
NOTE:
The food processor bowl is
not intended for blending drinks.
DO
NOT
overfill.
NOTE:
Please follow the same instructions
to install the Dough Blade Assembly.
NOTE:
The Chopping and Dough Blade
Assemblies will fit loosely on the
drive gear.
12
To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
