9
10
www.ninjablenders.co.za
086 728 8149 (Calls charged at VAS rates. Free minutes do not apply.)
NOTE:
Nutri Ninja
™
|
Ninja
™
Blender System with Auto-
iQ
™
Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base.
(Fig. 6)
9
Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program.
(Fig. 7)
NOTE:
Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
NOTE:
Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
10
To pause the appliance, press the selected speed or
Auto-iQ Program a second time.
(Fig. 8)
11
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning.
(Fig. 8)
12
Turn the pitcher anticlockwise to remove and then lift
off the base.
(Fig. 9)
CAUTION: Never insert your hands in the pitcher
as the Stacked Blades are sharp. Always use a
spatula to dislodge food that has stuck to the
sides of the pitcher.
CAUTION: If using the pour spout, ensure that the
lid is fully locked onto the blender pitcher.
CAUTION: If pouring with the lid removed, ALWAYS
remove the blade assembly first before pouring
.
13
Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents.
14
For thicker consistencies, remove the lid and blade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90
°
angle and lift the lid off the blender pitcher.
(Fig. 10)
15
Make sure that the unit is unplugged when not in use.
16
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you.
(Fig. 11)
Assembly and Use for the Blender - cont.
Assembly and Use for the Processor Bowl
ASSEMBLY
MED
LOW /
DOUGH
Fig. 5a
Fig. 5b
MED
LOW /
DOUGH
Fig. 2
MED
LOW /
DOUGH
Fig. 3
Fig. 1
MED
LOW /
DOUGH
Fig. 4
Fig. 6a
Fig. 6b
NOTE:
Nutri Ninja
™
|
Ninja
™
Blender System with
Auto-iQ
™
Technology can sense which jar is on the
motor base. The function lights will illuminate depending
on which jar is placed on the motor base.
(Fig. 1)
1
Holding the desired blade by the top of the shaft, place it onto
the drive gear inside the bowl. Ensure that the attachment is
seated properly and is standing upright.
(Fig. 2)
NOTE:
The blade will fit loosely on the drive gear.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Align and lower the Processor Bowl onto the motor
base.
(Fig. 3)
Handle should be aligned slightly to the
right of the “
LOCK
” symbol on the motor base.
4
Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged.
(Fig. 4)
5
The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner.
(Fig. 5a, Fig. 5b)
6
Add the ingredients to the bowl, making sure that they
do not exceed the “MAX” fill line on the side of the bowl.
7
Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle.
(Fig. 6a)
Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle
MUST
be aligned
in order for the blender to turn on.
(Fig. 6b)
NOTE:
The 1.8 L bowl is not intended for blending
drinks. Do not overfill.
8
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Chopping Blade is sharp, not locked in place and removable, handle with care. When handling
the Chopping Blade, always hold by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 8
USE
REMOVAL
Fig. 6
Fig. 9
Fig. 7
Fig. 10
Fig. 11
WARNING: Never leave the appliance unattended while in use.
CAUTION: Stacked Blades are sharp, not locked in place and removable, handle with care. When handling
the Stacked Blades, always hold them by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
