background image

2

www.sharkninjamanuals.com

27.  Max ON time is 60 seconds under 1500W load. 

If the appliance overheats, a thermal switch will 

become activated and shut off the motor. To 

reset, unplug the appliance and let it cool down 

for approximately 15 minutes before using again.

28.  In the event that the unit overloads, the control 

panel lights will flash and the unit will shut down. 

Unplug the appliance and let it cool down for 

approximately 15 minutes before using again.

29.  Max PULSE iteration is 30 Pulses. After 30 

Pulses allow 10 minutes to pass before running 

the PULSE function up to an additional 30 Pulses.

30.  The maximum rating is based on the stacked 

blade (pitcher) that drives the greatest power 

and other recommended attachments may draw 

significantly less power or current.

31.  To avoid injury, never attempt to place the Pro 

Extractor Blade

 onto the motor base without first 

assembling the blade assembly to the Nutri Ninja Cup.

32. 

DO NOT

 push food into the food chute with your 

fingers. Always use the food pusher provided.

33.  Appliance accessories are not intended to be 

used in the microwave as it may result in damage 

to the accessories.

34. 

THIS PRODUCT IS INTENDED FOR 

HOUSEHOLD USE ONLY.

 Do not use this 

appliance for anything other than its intended use. 

Do not use outdoors.

35. 

DO NOT

 remove lid until blade has 

COMPLETELY 

STOPPED

.

36. 

DO NOT

 attempt operation without the cover 

being in place.

37. 

DO NOT

 process liquid ingredients in the coffee 

grinder. Accessory is not intended for liquid 

processing.

38. 

DO NOT

 attempt to chop ice in the coffee grinder.

39.  Check stainless steel cup and coffee grinder for 

presence of foreign objects before using.

SAVE THESE 

INSTRUCTIONS

11. 

NO SERVICEABLE PARTS

. Incorrect re-

assembly or repair can cause a risk of electrical 

shock or injury to persons when the appliance is 

used. Contact Customer Service.

12.  Always use the appliance on a dry, level surface.
13.  Keep hands, hair, clothing, as well as utensils 

out of container while processing or blending 

to reduce the risk of severe injury to persons or 

damage to the appliance. A scraper may be used 

but only when the appliance is not running.

14.  Avoid contact with moving parts.
15. 

DO NOT

 attempt to sharpen blades.

16.

  DO NOT

 use the appliance if either set of blades 

are bent or damaged.

17.  To reduce the risk of injury, never assemble the 

stacked blades in the pitcher or the chopping 

blade in the bowl without the pitcher or the bowl 

being properly attached to the motor base.

18. 

DO NOT

 operate this appliance on or near any hot 

surfaces (such as gas or electric burner or in a 

heated oven).

19.  The use of attachments or accessories 

including canning jars, not recommended by the 

manufacturer may result in fire, electric shock or 

personal injury.

20. 

DO NOT 

remove any container from the motor 

base while the appliance is in operation. Always 

unplug the unit when not in use.

21.  To reduce the risk of injury,

 NEVER

 operate the 

appliance without the lid in place; 

DO NOT

 try to 

defeat or bypass the interlock mechanism. When 

using the removable blades, make sure they are 

properly installed before operating the appliance.

22. 

DO NOT

 expose containers to extreme 

temperature changes. 

23.  Extreme caution must be used when moving an 

appliance containing hot food, water or other liquids. 

24. 

DO NOT 

overfill. 

DO NOT

 exceed “MAX” fill line.

25. 

DO NOT

 operate the appliance empty.

26.  To reduce the risk of burns, always allow the 

appliance to cool before taking off parts and 

before cleaning. 

Summary of Contents for BL64X series

























Reviews: