12
13
ninjakitchen.com
IMPORTANT:
As a safety feature, the
power light ( ) will flash and the motor
will not work if the Pitcher and lid are
not installed correctly. When the Pitcher
and lid are installed properly, the power
light ( ) will be solid, indicating that the
appliance is ready for use.
5
Holding the Stacked Blade Assembly
by the top of the shaft, place it onto
the drive gear inside the pitcher. Ensure
that the Stacked Blade Assembly is
seated properly and is standing upright
6
Add the ingredients to the pitcher,
making sure that they do not exceed
the highest measured marking line on
the side of the pitcher.
7
Plug the power cord into the electrical
outlet and press the power button ( ).
NOTE:
The Stacked Blade Assembly
will fit loosely on the drive gear.
NOTE:
If you need to add additional
ingredients while the appliance is
processing, open the pour spout cap
and pour the ingredients in through
the opening.
NOTE:
When blending any kind of
liquids, such as mixtures of any drinks
or smoothies, do not exceed the “MAX”
liquid mark (64 oz.) on the Pitcher.
ASSEMBLY
1
Place the motor base on a clean, dry,
level surface such as a counter or table
top. Press down on the motor base to
make sure that the Suction Cups adhere
to the counter or table top.
2
Align and lower the Pitcher onto the
motor base Handle should be aligned
slightly to the right of the “
LOCK
”
symbol on the motor base.
3
Rotate the pitcher clockwise until it clicks
in place. As the pitcher rotates, it will
lower and the safety tabs on the bottom
of the pitcher will slide under the safety
tabs on the top of the motor base.
4
The pitcher can be placed on the motor
base two ways; the handle can be on the
front right corner or the front left corner.
ASSEMBLY & USE OF THE PITCHER
8
Holding the lid by the handle in the
upright position, place it on top of the
Pitcher aligning the triangle ( ) located
on the lid with the triangle ( ) located
on the Pitcher’s handle. Press the handle
down until you hear a click. The triangles
on the lid and the pitcher handle
MUST
be aligned in order for the blender to
turn on.
9
Review warning and caution statements
on page 13 before proceeding.
10
Press the power button to turn on the
unit. Select the speed or AUTO-iQ
Program that best suits your needs.
The AUTO-iQ program will stop the
appliance automatically at the end of
the program.
11
To pause the appliance, press the
selected speed or AUTO-iQ Program
a second time. When the program
is paused, the light on the program
button will flash until you press it again
to resume the rest of the program.
12
When you have reached your desired
consistency, stop the appliance by
pressing the power button ( ) and wait
for the Stacked Blade Assembly to
stop turning.
13
Turn the pitcher counter clockwise to
remove and then lift off the base.
14
Open the pour spout cap and use the
spout to empty liquid contents.
15
For thicker consistencies, first remove the
lid by pressing the release button and
pulling the lid handle up to a 90 degree
angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade
Assembly by the top of the shaft. Place
Stacked Blade Assembly away from the
work area to avoid accidental contact.
Finally, empty contents from the pitcher.
16
Make sure that the unit is unplugged
when not in use.
NOTE:
Nutri Ninja®
|
Ninja® Blender Duo®
with AUTO-iQ® Technology can sense
which jar is on the motor base. The
function lights will illuminate depending
on which jar is placed on the motor base.
IMPORTANT:
Review all warnings on
pages 4–7 before proceeding.
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
HIGH
PULSE
LOW
DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE
FROZEN
BLENDING
