10
ENGLISH
11
ninjakitchen.com
ninjakitchen.com
6
Holding the Stacked Blade Assembly
by the top of the shaft, place it onto the
drive gear inside the pitcher. Ensure that
the Stacked Blade Assembly is seated
properly and is standing upright.
7
Add the ingredients to the pitcher, making
sure that they do not exceed the highest
measured marking line on the side of the
pitcher. side of the pitcher.
8
Holding the lid by the handle in the
upright position, place it on top of the
Pitcher aligning the triangle ( ) located
on the lid with the triangle ( ) located
on the Pitcher’s handle. Press the handle
down until you hear a click. The triangles
on the lid and the Processor Bowl handle
MUST be aligned in order for the blender
to turn on.
9
Plug the power cord into the electrical
outlet and press the power button ( ).
NOTE:
The Stacked Blade Assembly will
fit loosely on the drive gear.
NOTE:
If you need to add additional
ingredients while the appliance is processing,
open the pour spout cap and pour the
ingredients in through the opening.
NOTE:
NOTE:
When blending any kind
of liquids, such as mixtures of any drinks
or smoothies, do not exceed the MAX
LIQUID mark (1.9 L) on the pitcher.
ASSEMBLY
1
Place the motor base on a clean, dry,
level surface such as a counter or table
top. Press down on the motor base to
make sure that the Suction Cups adhere
to the counter or table top.
3
Align and lower the Pitcher onto the
motor base Handle should be aligned
slightly to the right of the
LOCK
symbol
on the motor base.
4
Rotate the pitcher clockwise until it clicks
in place. As the pitcher rotates, it will lower
and the safety tabs on the bottom of the
pitcher will slide under the safety tabs on
the top of the motor base.
5
The pitcher can be placed on the motor
base two ways; the handle can be on the
front right corner or the front left corner.
ASSEMBLY & USE OF THE PITCHER
1200
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON / OFF
MARCHE
/ARRÊT
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
FOOD PURÉE
PURÉE D’ ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRA BLEND
ULTRA MÉLANGE
BLEND
MÉLANGE
LOW / DOUGH
BAS / PÂTE
1200
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON / OFF
MARCHE
/ARRÊT
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
FOOD PURÉE
PURÉE D’ ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRA BLEND
ULTRA MÉLANGE
BLEND
MÉLANGE
LOW / DOUGH
BAS / PÂTE
10
Press the power button to turn on the unit.
Select the speed that best suits your needs.
11
Select the speed according to your
blending requirements*:
• Use the LOW setting for processing and
mixing.
• Use the MEDIUM setting for blending
and ice crushing.
• Use the HIGH setting for pureeing and
liquefying.
• Use the PULSE button for controlled
chopping and processing.
*See Blending Chart.
12
When you have reached your desired
consistency, stop the appliance by
pressing the power button ( ) and wait
for the blade to stop turning.
NOTE:
Add the liquid ingredients first
and then the dry ingredients.
DO NOT
exceed the “Max liquid” mark (64 oz.)
on the pitcher.
NOTE:
Pulse ingredients for even chopping
by pressing down in short interval.
IMPORTANT:
Review all warnings on
pages 4–7 before proceeding.
13
Turn the pitcher counter clockwise to
remove and then lift off the base.
14
Open the pour spout cap and use the
spout to empty liquid contents.
15
For thicker consistencies, first remove
the lid by pressing the release button
and pulling the lid handle up to a 90
degree angle to lift lid off the pitcher.
Then, carefully remove the Stacked Blade
Assembly by the top of the shaft. Place
Stacked Blade Assembly away from the
work area to avoid accidental contact.
Finally, empty contents from the pitcher.
16
Make sure that the unit is unplugged
when not in use.
17
To release the motor base from the counter
or table top, place your hands underneath
both sides of the motor base and gently
pull the unit up and towards you.
