8
w w w. ninjak i t chenme .com
™
CAUTION:
Chopping Blade
Assembly is sharp
and not locked
in place. Before
emptying contents
carefully remove lid
and Chopping Blade
Assembly, holding it
by the shaft. Failure
to do will
result in
risk of
laceration.
NOTE:
Ninja
™
Auto-iQ
™
Technology can sense
which jar is on the motor
base. The function lights
will illuminate depending
on which container is
placed on the motor base.
1
Review warning and caution statements
above before proceeding to number 2.
2
Place the motor base on a clean, dry, level
surface such as a counter or table top.
3
Holding the desired blade assembly by the
top of the shaft, place it onto the drive
gear inside the bowl. Ensure that the blade
assembly is seated properly and is standing
upright.
(Fig. 1)
NOTE:
The blade assembly will fit loosely on
the drive gear.
4
Place the motor base on a clean, dry, level
surface such as a counter or table top.
5
Align and lower the Processor Bowl onto
the motor base.
(Fig. 2)
Handle should be
aligned slightly to the right of the “LOCK”
symbol on the motor base.
6
Rotate the bowl clockwise until it locks in
place, you will hear a click when the lock is
engaged.
(Fig. 3)
7
The bowl can be placed on the motor base
two ways; the handle can be on the front
right corner or the front left corner.
(Fig. 4, Fig. 5)
8
Add the ingredients to the bowl, making sure
that they do not exceed the “MAX” fill line
on the side of the bowl.
9
Holding the lid by the handle in the upright
position, place it on top of the Processor Bowl
aligning the triangle located on the lid with the
triangle located on the Processor Bowl handle.
(Fig. 6)
Press the handle down until you hear a
click. The triangles on the lid and the Processor
Bowl handle MUST be aligned in order for the
blender to turn on.
(Fig. 7)
NOTE:
The 1.2 L bowl is not intended for
blending drinks. Do not overfill.
10
Plug the power cord into the electrical outlet
and press the power button.
BLEND
PULSE
or
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.
WARNING: Handle the Chopping Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential to expand after blending resulting in excessive
pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
AND
USE FOR
THE 1.2 L
PROCESSOR
BOWL
