10
®
A U S T: 18 0 0 8 9 0 8 4 0
ASSEMBLY
ASSEMBLY OF
THE PROCESSOR
BOWL
NOTE:
Ninja
®
Auto-iQ
™
Technology can sense
which jar is on the motor
base. The function lights
will illuminate depending
on which container is
placed on the motor base.
ASSEMBLY:
WARNING: NEVER LEAVE THE APPLIANCE
UNATTENDED WHILE IN USE.
CAUTION: USE CAUTION WHEN
HANDLING THE CHOPPING BLADE AS IT
IS VERY SHARP.
IMPORTANT: MAKE SURE THE MOTOR
BASE IS PLUGGED IN FOR USE.
1
Holding the desired blade by the top of the
shaft, place it onto the drive gear (
A
) inside the
bowl. Ensure that the attachment is seated
properly and is standing upright.
NOTE: THE CHOPPING BLADE WILL FIT
LOOSELY ON THE DRIVE GEAR.
2
Place the motor base on a clean, dry, level
surface such as a counter or tabletop. Press
down on the motor base to make sure that the
suction cups adhere to the counter or tabletop.
3
Align and lower the Processor Bowl (
B
) onto the
motor base. Handle should be aligned slightly to
the right of the
LOCK
symbol on the motor base.
4
Rotate the Processor Bowl clockwise (
C
) until
it locks in place (you will hear a click when the
lock is engaged).
5
The bowl can be placed on the motor base
two ways; the handle can be on the front right
corner (
D
) or the front left corner (
E
).
6
Add the ingredients to the bowl, making sure
they do not exceed the highest measured
marking line on the side of the bowl.
7
Holding the lid by the handle in the upright
position (
F
), place it on top of the bowl aligning
the triangle ( ) located on the lid with the
triangle ( ) located on the bowl handle. Press
the handle down until you hear a click.
8
The triangles on the lid and the Processor Bowl
handle (
G
)
MUST
be aligned for the blender to
turn on.
9
Plug the power cord into the electrical outlet.
The function lights will illuminate.
BLEND
PULSE
or
1.2 L PROCESSOR BOWL
A
B
C
D
E
F
G
If your unit comes with this accessory, read the following instructions. For a list of what is included with this model, refer to inside flap of the box.
CAUTION: THE CHOPPING BLADE
IS NOT LOCKED IN PLACE.
IF POURING WITH THE LID
REMOVED, ALWAYS REMOVE
THE CHOPPING BLADE FIRST.
CAUTION: CHOPPING BLADE IS
NOT LOCKED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLEND AND PREP BOWL.
IMPORTANT: DO NOT
OVERFILL. TO AVOID SPILLING,
DO NOT ADD INGREDIENTS
PAST THE “MAX” FILL LINE.
Summary of Contents for BL490ANZ
Page 1: ...OWNER S GUIDE BL490ANZ...
