
HOW TO STORE
1
Store the Nutri Ninja
™
with Auto-iQ
™
upright with the
Pro Extractor Blades Assembly inside the corresponding
container with the lid secured on top� Do not place
anything on top� Store the rest of the attachments in a
safe place where they will not be damaged and won't
cause harm� Secure the power cord underneath the
base by wrapping the cord around the cord wrap�
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja Cup with the blade
assembly attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja with Auto-iQ features a unique safety
system which prevents damage to the unit’s motor
and drive system should you inadvertently overload
your appliance� If the appliance is being overloaded,
the motor will stop� To reset the appliance, follow the
resetting procedure below:
1
Unplug the appliance from the electrical outlet�
2
Remove and empty the cup and ensure that no food is
jamming the Pro Extractor Blades Assembly�
3
Allow the appliance to cool for approximately 30
minutes�
4
Re-install the cup onto the base and re-plug the
appliance into the electrical outlet�
5
Proceed to use the appliance as before while making
sure not to exceed the recommended maximum
capacities�
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other�
2
Hand Washing
: Wash containers, lids, and Pro
Extractor Blades Assembly in warm, soapy water� When
washing the Pro Extractor Blades Assembly, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades� Handle the Pro Extractor Blades
Assembly with care to avoid contact with sharp edges�
Rinse and air dry thoroughly�
Dishwasher
: Containers, lids, and Pro Extractor Blades
Assembly are all dishwasher safe� The lids and Pro
Extractor Blades Assembly are top rack dishwasher
safe� Ensure that the Pro Extractor Blades Assembly
are removed from the containers before placing in the
dishwasher�
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3
Wipe the motor base clean with a damp cloth�
If the appliance needs servicing, please call customer
service on SG +65 800 120 5111 or MY +60 1800
803 915�
Care & Maintenance
Troubleshooting Guide
PROBLEMS
POSSIBLE REASONS & SOLUTIONS
Unit doesn't turn on
•
Make sure the unit is plugged in�
•
Insert and rotate cup clockwise in the base until it "clicks"� Display
should turn on�
Unit doesn't turn off
•
Remove cup from base by rotating cup anticlockwise and lifting out�
Display should turn off� Unplug the power cord from the outlet�
Lid/blade assembly hard to
assemble
•
Set the cup on a level surface� Place the lid or blade assembly on the top
of the cup and align the threads so that the lid/blades sit flat on the cup�
Twist clockwise so that the lid/blades evenly align to the cup until you
have a tight seal�
Food is not evenly chopped
•
For best results when chopping, make sure all ingredients are as dry
as possible� Cut pieces down to even sizes, and reduce the amount of
food in the cup� Use very short pulses by quickly pressing the "PULSE"
button�
Doesn't mix well, food gets
stuck
•
Using the Auto-iQ
™
programs is the easiest way to achieve great results�
The pulses and pauses allow the food to settle towards the blade� If food
is routinely getting stuck adding some liquid will usually help�
•
When packing the cups, start with fresh items, then powders/nuts� Add
liquids, and finally frozen items or ice�
Motor base won’t stick to
counter or tabletop
•
Make sure surface and suction feet are wiped clean� Suction feet will only
stick to smooth surfaces� Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes�
•
DO NOT attempt to use appliance when the motor base is stuck to a surface
that is not secure, (cutting board, platter, plates, etc�)�
Unit is difficult to remove
from counter for storage
•
Tip unit forward from the back to easily disengage the suction feet�
9
10
ninjakitchen.sg | ninjakitchen.my
SG
+65 800 120 5111 |
MY
+60 1800 803 915