Shenzhen Ningmore Technology Co.,Ltd
Gps Tracker Manufacturer---Best Choice For Gps Tracker
2
2. INSTALLATION
2. 1 SIM-CARD INSTALLATION
1)
Open 2) 3)
2.2 USE THE GPS DEVICE
Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.
For first use, please initialize the unit and restore it to default setting. (Please refer to 3.1
for instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals.
The indicator will keep flashing every 3 seconds when the unit has received
the signals.
When this unit receives GPS signals normally, you can use it and do any setting as the instructions of this
manual.
2.3 EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
Left-GREEN-Flashing
GSM/GPRS communication established.
Center-RED-Not lit
Fully charged.
Center-RED-Solid red
Charging.
Center-RED-Flashing
Low battery.
Right-BLUE-Not lit
No power to the unit or the unit can’t start.
Right-BLUE-Continuously lit
Searching for GPS signal.
Right-BLUE-Flashing
GPS location successful.
