Trueshopping
www.Trueshopping.co.uk
You are now ready to switch the machine on and resume steam cleaning.
If you live in a hard water area, it is best to use distilled water (this
prevents internal limescale that may damage the steam system).
Warning - risk of injury!
Warning! This cap gets hot in use; handle with care.
Cleaning floors
Attach the floor brush to the extension wands, which snap together. Then
attach the extension wand to the steam gun. Do ensure the extension wands
are firmly connected. Before cleaning always remove any dust from the
surface you wish to clean. To release the extension wands press the button on
the hose connection.
Cleaning floors and carpets with the cleaning cloth
While the machine is switched off attach the cleaning cloth to the floor brush
via the spring loaded clips, make sure the edges of the cleaning cloth are
secure. DO NOT attempt to do this while the machine is still hot. Never remove
the cleaning cloth whilst the safety trigger is released or the machine is warm
to the touch.
Fitting the accessories
The accessories may be fitted to the steam gun (9) using one or both adaptors
16a and 16b. When using the round brushes or high-pressure nozzle,
Squeegee head, adaptors 16a and 16b are both required.
Cleaning and maintenance
Cleaning and maintenance operations should be carried out with the appliance
disconnected from the power supply.
The machine should be allowed to completely cool down before it is stored
away or cleaned.
Clean the machine and its accessories with a slightly damp cloth only. Never
use a cleaning product or detergent. To ensure that your machine operates
correctly over a long period, rinse out the water tank once a month to remove
Trueshopping
www.Trueshopping.co.uk
lime-scale deposits. Never use vinegar or a lime-scale remover.
Switching on the appliance
Before switching on the appliance, check that the mains voltage that you want
to use
is suitable for the appliance. The information you need for this is shown on the
identification plate. (230V~50Hz).
How to operate the steam gun
First: Know your steam gun
You will find the Steam trigger and Red Safety button on the steam gun.
You will see that Red safety button says off/lock on. (See photo 1).
Second: Operation
a) Steam - spray out
First press the Red Safety button to “ON” position, after that press the steam
trigger. You only need to press the steam trigger when you want to clean. See
photo (No.2)
b) Steam - continuous spray out
Press the steam trigger, and then press the red safety button to “Off/Lock”
position. This means that you don’t need to keep pressing the trigger. The
steam will continuously spray out. (See photo (No.3+4).
c) Close
After cleaning you need to close the steam gun. If you are cleaning as on the
Pic 4 situation and you want to stop cleaning, you only need to press the red
safety button to the “ON” position, the steam trigger will release. After that,
press the red safety button to “off/lock” position. That means no matter how
many times you press the steam trigger, no steam will come out. (See photo
from 5-1).
