ABNORMITY AND COUTERMEASURE IN USE
Index
Abnormities
Cause
Countermeasure
1
After finishing the
normal shredding, it
runs ceaselessly yet.
Too much scrapped
paper in the
wastebasket, so that
the just scrapped
paper cannot fall
and leave in the
entry.
1. Cut off the power, and
empty the
wastebasket.
2. Cut off the power, and
press the scrapped
paper down to make
them away from the
machine head.
2
Paper feed or positive
rotation is normal, but
there are still some
scrapped paper
hanging at the exit
after finishing.
The slots of the
blades clamp the
scrapped paper.
Set the slide switch to
“REV” (if need, please
clean the scrapped
paper at the exit).
3
It can’t work if feeding
paper follows
withdrawing paper.
Some scrapped
paper lock
automatic inductive
device.
Set the slide switch to
“REV”.
4
Some paper is in the
entry, but shredder
does not work.
After feeding paper,
any corner of the
paper is inserted,
but the rest doesn’t
touch automatic
inductive device.
Adapt to the position of
the feeding paper and
make it touch the
automatic inductive
device.
5
The paper is jammed,
and the machine stops
rotating.
1. The number of
the inserted
paper is too
larger than the
limitation
2. Locked rotor
makes the motor
overheated and
then temperature
protection set
takes action.
1. Set the slide switch to
“REV” and withdraw
the shredding paper.
2. Unplug the plug and
let the machine stop
for a while.
6
The machine does
n’t
start after inserting a
sheet of paper, or stop
running when paper is
being inserted.
The paper is too
thin, too soft, humid,
or too crinkly to
activate automatic
inductive device.
1. Fold the paper and
then insert it.
2. Set the slide switch to
“REV”.
Disposal instructions
This recycling logo informs the final user that it’s forbidden to
put your product on garbage. If they don
’t want this product
anymore they should return it to the distributor.
Manufacturer: Ningbo Ofitech Business Machines Co., Ltd
Address: Kaifat Group, Qiming Road, Yinzhou Industrial Zone,
Ningbo 315105, P.R. China
