10
2.
Roller pressure is too
high.
3.
The paper is not proper.
2.
Adjust roller pressure.
3.
Select the proper paper.
6 No
outlet
after
folding.
Wrinkle on the folded sheets.
Make the rough adjustment of the
lower folding case to the highest
position.
7
Folded sheets are
not neat.
Roller pressure is too low.
Adjust the roller pressure.
8 Interrupted
output of folded
sheets.
1.
Outlet roller position
incorrect.
2.
Paper segments in the
sheet counter sensor.
1.
Adjust the position of the
outlet roller. (Refer to the
Fig.4 of the control panel ).
2.
Clean up the paper segments.
9 No
display
with
power on.
1.
The fuse is gone.
2.
Power supply failure.
1.
Replace the fuse.
2.
Replace the power supply.
10 Paper feeding
speed is not
stable.
The mounting screws of the
electromagnet are loose.
Tighten the electromagnet
screws.