Information for users of the RECHARGEABLE LED HEADLAMP
EN
Model: 6121 030 166 00 CXS CREE LED XPG HEAD LAMP, type: XPG
Dear customers,
The “Information for users” form part of the product and its purpose is to help you acquaint yourself with
the product. Please read carefully the following
information before use, they contain important instructions for putting the product into operation and for its operation. Then save this information for future use. If
you pass the product on to other people, make sure you also provide this information.
Recommended use:
Due to its low weight and small size, this LED headlamp is perfect for use in outdoor activities as well as other activities.
Instructions for use
On/off:
pressing
the switch near the lamp you select one of the following functions: 1) 100% power, 2) 70% power, 3) 30% power, 4) switch off.
The SOS mode is switched on by holding the power button for longer.
Turn the red rear position light on by pressing it. Press 1x to turn on, press again to flash, press again to turn off.
Accumulator and its charging:
This headlamp has a 1000 mAh built-in polymer lithium battery.
Recharge the headlamp accumulator before using it for the first time. The accumulator should never be completely discharged during its using, because it can cause
its damage. You should always start charging it at a significant drop of light intensity. If the head lamp is not used for a long time, battery recharge is required before
the next use. The battery will self-discharge and must be recharged at least 1x every 3 months to avoid the voltage drops below the threshold level and thus the
possible destruction of the battery.
Charge in dry environment. Do not charge the accumulator if the headlamp is moist/wet. Make sure that no short circuit occurs on the charging contacts. The charging
contacts should not come into contact with humidity or metal objects.
Charging procedure:
- Turn the rubber cover on the headlamp body to see the connector and connect the power cord.
- The red light is lit when charging. When the accumulator is fully charged, the red light turns green.
- After charging, unplug the power cord and put back the rubber cover so that no water, moisture or dust may enter the headlamp.
Failure to follow these instructions can cause product damage and damages for which the seller is not liable.
Cleaning, storing:
Clean the product using a damp cloth; do not use any chemical agents, abrasive or other detergents. Never immerse the product in water.
The product, including its parts and components, must be kept out of reach of children. Do not expose it to extreme temperatures, action of direct sunlight and high
humidity. Store it in dry environment.
Caution:
The product shall be used solely as a lamp and it is forbidden to change its properties or to make any modifications of it. If the product is used for any
other purpose or incorrectly, it can lead to a damage or cause an injury (fire, short circuit, electrical hazard etc., whereas the manufacturer or the seller shall not retain
responsibility for any damage to property or health. Do not expose the product to extreme temperatures, intensive vibrations, and explosive atmospheres, action of
solvents or toxic vapours. CREE LED light sources have a lifetime of 50,000 hours, so they are not subject to replace. The light source of this lamp is non-replaceable;
after the end of the lifetime of this lamp it is necessary to replace the entire lamp and remove the old lamp for disposal. Do not throw the headlamp or accumulator
into fire, do not disassemble, do not short circuit.
Safety instructions:
- The product is not a toy for children. Considering the fact that the product contains small elements that children could swallow, the headlight must not be used by
children and persons whose physical, sensory or mental inability or lack of experience and knowledge prevents safe use of the device unless they are under the
supervision of the person responsible for their safety. Keep the headlight away from children. Do not direct the ray of light into
somebody’s eyes
–
A user or any
other person must not look directly into the ray of light. If a person is exposed to the light of the lamp, he/she must close his/her eyes and turn his/her head away
from the light. Do not immerse the headlamp into water. Do not cover the headlamp during the use, because it can cause heat storage and subsequent ignition. It is
allowed to operate the headlamp at the temperatures ranging from -
15 ºC to + 40 ºC.
- If you use the headlamp in a work process, proceed in accordance with applicable legal regulations.
Description:
A
–
flexible adjustable band
B
–
switch/functions control switch
C
–
CREE LED white diode
D
–
2 LED red diodes
E
–
charger connector, charging connector cover
F
–
USB charging cable
G
–
rear position light
Technical parameters:
Light sources: 1x CREE LED XPG diode 5 W, 2x red LED diodes 0,1 W.
Max luminous flux: 140 lm
Beam distance up to 130 m
Modes, white CREE LED diode light time: 100 % - 4 hrs, 70 % - 8 hrs, 30 % - 12 hrs.
Adjustable beam angle (90
°
)
Power supply: built-in polymer lithium battery 1000 mAh
Charging: micro USB charging cable
Size: 6x3,5x3 cm
Weight: 55 g
Material: ABS + elastic band
Protection class: III.
IP number: IP44
–
Protected against penetration of solid foreign objects larger than 1 mm, protected against splashing water.
Contents of the package:
1x headlamp with a headband and rear position light, micro USB charging cable, instructions for use.
Disposal:
After the end of its life, it is prohibited to throw it away with household waste. For the purpose of correct disposal of the product, it is
necessary to deliver it into any determined collection point.
Manufacturer: NINGBO MEIKE LEISURE PRODUCTS CO. LTD. NO. 28-1 BAIZHANG EAST ROAD, NINGBO 315041, CHINA.
Poděbradská 260/59, Hloubětín, 198 00 Praha 9, Czech Republic
Importer: CANIS SAFETY a.s.
