NINER ENCYCLOPEDIA
>>
SPECIFICATION & SETUP GUIDE
30
: Updated: SEPT 5, 2012
HEADSET SPECIFICATIONS
MODEL
YEAR
HEADSET SPEC
OPTIONS
ANGLESET COMPATIBILITY
ANGLESET OPTIONS
HEADSET NOMENCLATURE
ONE 9
2005-2011
EC34/28.6|EC34/30
Standard 1–1/8”
threadless headset
ONE 9
2012-Present
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
AIR 9
2006-2011
EC34/28.6|EC34/30
Standard 1–1/8”
threadless headset
AIR 9
2012-Present
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
EMD 9
2006-2011
EC34/28.6|EC34/30
Standard 1–1/8”
threadless headset
EMD 9
2012-Present
ZS44/28.6|ZS56/40
ZS44/28.6|ZS56/30**
ZS44/28.6|ZS56/30***
ZS44/28.6|EC56/40†
Internal (ZS) 1–1/8” upper
1.5" lower
SIR 9
2006-2011
EC34/28.6|EC34/30
Standard 1–1/8”
threadless headset
SIR 9
2012
ZS44/28.6|EC44/40
Internal (ZS) 1–1/8”upper
1.5” external lower
MCR 9
2006-2011
EC34/28.6|EC34/30
Standard 1–1/8”
threadless headset
AIR 9 RDO
2012
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
AIR 9 CARBON
2009-Present
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
JET 9
2010
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
JET 9
2011
ZS44/28.6|ZS56/40
ZS44/28.6|ZS56/30**
ZS44/28.6|ZS56/30***
ZS44/28.6|EC56/40†
Internal (ZS) 1–1/8” upper
1.5" lower
JET 9 RDO
2011
ZS44/28.6|ZS56/40
ZS44/28.6|ZS56/30**
ZS44/28.6|ZS56/30***
ZS44/28.6|EC56/40†
Internal (ZS) 1–1/8” upper
1.5" lower
JET 9 RDO
2012-Present
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
RIP 9
2006-2008
EC34/28.6|EC34/30
Standard 1–1/8”
threadless headset
RIP 9
2009-2010
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
RIP 9
2011
ZS44/28.6|ZS56/40
ZS44/28.6|ZS56/30**
ZS44/28.6|ZS56/30***
ZS44/28.6|EC56/40†
Internal (ZS) 1–1/8” upper
1.5" lower
WFO 9
2009-2010
IS42/28.6|IS52/40
IS42/28.6|IS52/30**
Integrated 1–1/8” upper
1.5" lower
WFO 9
2011
ZS44/28.6|ZS56/40
ZS44/28.6|ZS56/30**
ZS44/28.6|ZS56/30***
ZS44/28.6|EC56/40†
Internal (ZS) 1–1/8” upper
1.5" lower
* lower external cup for using a taper steerer tube in a 44mm ID ZS head tube
** denotes the ability to run a straight 1 1/8” fork in our tapered head tubes
*** CURRENT (as of 10/2010) availibility of angleset headsets require the
use of straight 1 1/8” forks, offsets include 0, 0.5, 1, 1.5 degrees
† Available after 2011, uses an external cup lower WITH a taper steerer tube,
offsets include 0, 0.5, 1, 1.5 degrees
