1. Apply the glue around the slot on the tail (See figure A) before fitting
the horizontal empennage on the tail slot. Make sure the empennage is
in line with the body (See figure B)
Instruction for assembling the airplane
( )
A
( )
B
2. Apply the glue on vertical empennage (See figure C) before fit it on
the slot on the tail (See figureD). The vertical empennage must be in
right angle with horizontal empennage (See figure E).
( )
C
( )
D
( )
E
3. Fit the wing on the top of the plane body. Make sure the wing exactly
at the center of the body. The wing is fixed by pins at the front and by
screw at the back (See figure F)
（
)
Figure F
7
