【A
ut
o
Pr
og
rams】
19
● Please turn off the power of remote control after the massage.
Change program
Auto program →Auto program
Auto program →Manual program
Halfway end program
Caution
●
→
●
●
●
→
⑤
The program ends.
Long-term continuous use may cause excessive stimulation, resulting in adverse
effects or injuries.
If you feel too stimulating but continue to use it, it may lead to injury.
Total massage time should not exceed 60 minutes per day. Massages
should be taken in intervals of 90 minutes or less, with significant
breaks between sessions. Do not massage any one area continuously for
more than 5 minutes at a time.
During a massage, if the legs are pulled out of the leg component, do not
force the legs back in.
Do not put your hands and feet in the movable parts such as the upper
and lower parts of the massage wheel, the back of the chair, etc.
In addition, do not wear hair accessories, necklaces, watches, bracelets,
rings or other hard objects when using the chair.
If you feel that the massage is too stimulating, please reduce the stimu-
lation according to this manual. If the stimulation is still too strong
after the adjustment, please stop using it and contact the dealer
(recorded at the bottom of the cover).
To interrupt the program, press the [Power] button when running. The massage wheel
will stop running after the massage mechanism has moved to its storage position.
In case of an emergency or abnormal operation of the massage chair, please press the
button [EMERGENCY STOP], to stop the massage chair immediately. After confirming
it is safe, press the [Power] button. The massage mechanism will move to its storage
position and the chair will incline for your safe exit.
When selecting a program, automatic tilting may occur in the automatic program. In
addition, automatic tilting may occur when the program is running. So before using,
please make sure there are no people or obstacles behind the chair. Also, when using,
please keep other people away from the massage chair when you are using it.
When the auto program is running, press the mode selection button to interrupt the
auto massage. You can then select the program you desire. Massage motion will begin
immediately after the press of a button.
It is not necessary to wait for the program to finish. It is feasible to switch to a different
program while one is running. In addition, even if the massage program is running, if the
running time exceeds 90 minutes, the massage will automatically end.
The massage wheel returns to the storage position and switches to standby mode.
Thereafter, you can select the mode you like.
When the auto program is running, press the other auto program buttons,
then the massage wheel will return to the detected shoulder position, and starts after
reconfirming the shoulder position. Shoulder position can be fine tuned when reconfirming
shoulder position.
