22
DOOR
Avoid opening the door while the drying process is under way as this prolongs the
programme time. When the door is opened, the display shows
-P-.
You have 5 minutes
in which to close the door before the cabinet turns the programme off completely
and the cabinet has to be restarted.
OPERATION OF SENSOR DRYER 1700/1900
ADJUSTMENT OF PARAMETERS AND CALIBRATION OF SENSORS
There are ways of optimising the automatic programmes of the drying cabinet for
best possible results.
Adjustments must be made if it is found that:
p
The laundry is not dried sufficiently.
p
The laundry is over-dried – long drying time.
The sensors need to be re-calibrated for ECO+ to work optimally.
Calibrating sensors
To calibrate sensors, turn off the cabinet without any load hung up inside, go to the
parameter list, choose parameter P400 and set it to the value 1. A calibration cycle
will then start that takes around 5 minutes. When the sensors have been calibrated,
the cabinet will re-start automatically.
Note:
It is important that the cabinet is at room temperature
when calibrating.
Summary of Contents for Easy Dryer 1700
Page 35: ......
Page 36: ...Gematech Innovation ...
