Nimbus Water Systems Sierra User Manual Download Page 4

4

41840-A McAlby Court, Murrieta, CA 92562

 (800) 451-9343,  email: [email protected]

The Sierra

 

Limited Warranty extends to the original purchaser of the system.  This warranty covers all parts and factory labor 

needed to repair any Manufacturer-supplied item that proves to be defective in material, workman ship or factory preparation.  

The above-mentioned warranty ap plies for the first full calender year from date of purchase.  These defective items are subject 

to the following exclusions: membranes, filters, O-rings, and all other parts or components that require regular replacement as 

a result of ordinary usage.

Disclaimers

  This Warranty applies only if the system is installed and used in compliance with the instructions enclosed with 

the sys tem. 

The Warranty does not cover any non-standard Sierra parts.  This Warranty does not cover the costs of repairs or adjustments 

to the unit that may be needed because of the use of improper parts, equipment or materials.  This Warranty does not cover 

repairs required due to use of non-standard Sierra parts, unauthorized alterations of the unit, or failure of a unit caused by such 

alterations or by unauthorized repairs. 

The Warranty does not cover malfunctions of the unit due to tampering, misuse, alteration, lack of regular mainte nance, misap-

plication, fouling due to hydrogen sulfide or iron, scaling from excessive hardness, or excessive membrane hydrolysis due to 

chlorine levels in excess of 1.0 mg/L.  In addition, damage to the unit due to fire, accident, negligence, act of God, or events 

beyond the control of the Manufacturer are not covered by this warranty. 

Incidental and Consequential Damages

  The Manufacturer does not assume responsibility for payment of inci dental and 

consequential damages as a result of the failure of this unit to comply with express or implied warranties, such as lost time, 

inconvenience, damage to personal property, loss of revenue, commercial losses, postage, travel, telephone expendi tures, or 

other losses of this nature.  Some states do not allow the exclusion or limitation of incidental or consequential dam ages, so this 

exclusion may not apply to you. 

Owner’s Warranty Responsibilities

  Under the provisions of the Warranty, the owner is expected to schedule maintenance, 

as de scribed in this Manual.  Neglect, improper mainte nance, abuse, or unapproved modifications may invalidate the Warranty.  

Should your unit develop a defect or otherwise fail to perform in accordance with this warranty, you should contact the dealer 

from whom the product was originally purchased.

Implied Warran ties

 The implied at-law warranties of merchantability and fitness for a particular purpose shall terminate on the 

date one year after the date of purchase.  Note: some states do not allow limitations on how long an implied warranty lasts, so 

the above limitations may not apply to you. 

Other Rights 

This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. 

C

Warranty

Model:

Date Code:

Install Date:

Sold by:

Installed By:

Service Center 

Phone Number: 

Summary of Contents for Sierra












Reviews: