7
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343, www.nimbuswater.com
CS-3 Tubing Connec
ti
ons
1. Measure and cut a length of tubing 1/4" tubing long enough to reach from the faucet to the faucet connector on the
system. Connect one end to the faucet nipple using a jaco nut and plas
ti
c insert. Connect the other end to the faucet con-
nec
ti
on on the post-
fi
lter suing a jaco nut and plas
ti
c insert.
2. Measure and cut the length of 1/4" tubing long enough to reach from the feed water supply to the inlet. Connect the
end to the feed inlet on the pre
fi
lter using a jaco nut and plas
ti
c insert. See Fig. 5.
3. Connect one end of a 3/8" length of tubing to the tank valve. Insert the other end
fi
rmly into the quick-connect cross on
the shut-o
ff
valve.
4. Connect the 1/4" tubing from the faucet to the white swivel with yellow collet on the membrane desalinator.
5. Connect the free end of the 3/8" drain tubing to the drain connec
ti
on.
Fig. 5
INSERT
FERRULE
COMPRESSION NUT
TUBING
