NimbeLink Skywire RL78, User Manual

Page: 10 / 11

3.2.2 Block
​ ​
Diagram
3.2.3 Switch ​ ​ Configuration
SW1 is used to control the configuration mode of the adapter. To configure the
adapter ​ ​ for ​ ​ use ​ ​ with ​ ​ the ​ ​ Renesas ​ ​ Kurumi ​ ​ do ​ ​ the ​ ​ following:
1.
​ ​
Remove
​ ​
power
​ ​
from
​ ​
J1
​ ​
and
​ ​
the
​ ​
PMOD
​ ​
connection.
2.
​ ​
Place
​ ​
SW1.1-SW1.5
​ ​
in
​ ​
the
​ ​
off
​ ​
position.
3.
​ ​
Place
​ ​
SW1.6
​ ​
in
​ ​
the
​ ​
on
​ ​
position.
4. ​ ​ Configuration ​ ​ complete.
PN ​ ​ 30018 ​ ​ rev ​ ​ 2 ​ © ​ ​ NimbeLink ​ ​ Corp. ​ ​ 2017. ​ ​ All ​ ​ rights ​ ​ reserved. 10