PN 30027 rev 2
NimbeLink Corp All Rights Reserved.
10
5. Accessing the Management Console
For advanced networking scenarios, the E2C Link configuration can be modified
via a web-based Management Console. The E2C Link is based on the
OpenWRT operating system so there is extensive flexibility in how the device can
be configured. Typical network use cases may require opening Ports, setting up
specific routing rules, or adjusting default Firewall settings.
5.1 How to connect to the Management Console
1) Connect the E2C Link to a PC with an Ethernet cable.
2) Configure the PC Ethernet port to get an IP address via DHCP.
3) Apply power to the E2C Link and wait one minute.
The E2C Link will assign an IP address to the PC.
4) Using a web browser on the PC, navigate to the web URL: 192.168.1.1.
The E2C Link will serve up a web page. The username and password can
be left blank until a username and password are set.
