• CHARGE THE SPEAKER SYSTEM
SAATI utilizes a micro USB charging port. Connect the
micro USB connector end of the cable to the unit and
the standard USB connector end to a personal com-
puter. Optionally, the standard USB cable end can be
connected to a mobile phone charger. Note that the
mobile phone charger is not supplied with the unit!
The LED indicator on the rear of the unit will stay
red until the unit is fully charged. Once charging is
complete, the LED will automatically turn off.
• TURN THE UNIT ON/OFF
Press and hold the power button for 3 to 4 seconds
until you hear audible sounds from the unit that it
is on.
To turn the unit off, simply press and hold the power but-
ton until you hear an audible that the unit is turning off.
• PAIRING
Turn on the unit. If the unit has not been paired before,
the LED indictor in the rear of the unit will blink blue.
This indicates that the unit is ready for pairing.
While the blue LED is blinking on the unit, navigate
to the Settings menu on your mobile device. Select
Bluetooth® and check that Bluetooth is enabled.
Otherwise, enable Bluetooth on your mobile device.
Then, in the Bluetooth settings screen, look under
New Devices or Other Devices and select the device
that starts with SAATI and select.
www.nimausa.com
BLUETOOTH WIRELESS
SPEAKER HELMET
AIRING, BUILT-IN MICROPHONE
