6
ASSEMBLY INSTRUCTION
Open the box, and take the scooter unit, wrench, stem cap for handlebar, bolts, and Velcro band from the box. Please check
whether all parts and components are complete or not.
STEP 1 UNFOLD SCOOTER
Grasp the steering tube with one hand, and raise it up to full unfolding, and screw in both
of the knobs with the other hand clockwise tightly. Please must make sure both of the
knobs are tightened completely.
(WARNING: Make sure your fingers are clear of the
folding or pinch point)
STEP 2 HANDLEBAR ASSEMBLY
Place the handlebar set onto the adjustive tube in the center. (Note: the brake lever shall
be in the right) Cover the handlebar with the clamp cap. Screw in the bolts, adjust proper
angle of handlebar, and then tighten the bolts to complete the assembly. Make sure the
handlebar cannot be moved forward or backward but fixed tightly.
STEP 3 ADJUST HEIGHT
This scooter can adjust the height of itself to suit different player. First release the
Quick Release Lever, one hand push the Spring Bolt, the other hand hold the
adjustive tube to push up or down. make the Spring Bolt into one of the Lock Holes.
So as to pitch the different height. At last tighten the Quick Release Lever, make
sure the adjustive tube cannot be moved.
