background image

English 

 

11 

 

 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 

Maintenance 

 

 

Daily Maintenance 

………………………………………………...

Warning:  

Disconnect the machine from the mains before  

cleaning or carrying out any maintenance work. 

To be carried out every day or every 8 hours of operation. 

1.  Grease “O” rings on the steam pin in the steam hose. 
2.  Wash the hose by sucking one or two litres of water from a basin into the collection tank. 
3.  Empty the collection tank, rinse and wipe down. 
4.  Remove the foam filter, wash in water and re fit. 

 

Take care not to damage the filter mesh.  If it becomes torn do not use the 
machine and replace damaged parts immediately. 

5.  Rinse detergent bottle with clean water. 
6.  Wipe down the body of the machine with a clean damp cloth 
7.  Always wash the accessories in hot soapy water 

DO NOT IMMERSE THE MACHINE OR HOSE IN WATER 

    

  8.   Wrap the power cable around the handle before storage. 

Weekly Maintenance 

………………………………………………...

To be carried out every week or every 50 hours of operation. 
     

As for daily maintenance plus the following: 

1.  Inspect the power cable for any signs of damage. If damaged do not repair, contact the 

supplier of this product. Do not use until repaired. 

2.  Inspect the hose assembly for any signs of damage. If damaged do not repair, contact 

the supplier of this product. Do not use until repaired. 

3.  Inspect castors to ensure all securing bolts are fully tightened. 

       

Safety Precautions 

………………………………………………...

This machine is to be used by trained operatives only

DO

 

 

Check the cable and plug are safe and intact 
before plugging the machine in.   

 

Place cleaning in progress signs where necessary 

 

Point the steam nozzle away from your body 
during use 

 

Empty and clean machine after each use 

DON’T 

 

Use the machine near people, children or 
animals 

 

Point steam at electrical apparatus 

 

Use the machine to clean the machine down 

 

Do not use on Velvet, satin or leather 

 

Leave the machine unattended 

Summary of Contents for SDV 8000

















Reviews: