F
SM_POSEIDON 4_en_Ver.1.0_08.2012
Service / Repair
23
Easy start valve
Control piston
Fig.F.21:
Control piston
Fig.F.22:
Control piston and start/stop switch
Fig.F.23:
Easy start valve
Fig.F.24:
Easy start valve
•Remove control piston using a 17mm
wrench and check for damages and wear.
•Grease the O-rings before reassembling.
•By reassembling be aware of the O-ring
between brass connector and micro switch
housing.
•Remove the easy start valve using a 5mm
allen key and replace if necessary.
NOTE:
The easy start valve is only used in
1~ machines
•Always replace the complete easy start kit
and not just single parts.
Summary of Contents for POSEIDON 4 Series
Page 1: ...Service Manual POSEIDON 4...
Page 32: ...H Wiring diagrams SM_POSEIDON 4_en_Ver 1 0_08 2012 32...
Page 33: ...H Wiring diagrams SM_POSEIDON 4_en_Ver 1 0_08 2012 33...
Page 34: ...H Wiring diagrams SM_POSEIDON 4_en_Ver 1 0_08 2012 34...