9
Operating
instructions
EN
3.6 Stop - dismounting of high pres su re hose
Danger of scalding!
Never dismount the high pressure hose
when the water temperature is above
50°C.
If the machine is set aside immediately after hot water or steam operation, it should be cooled down in
"cold water mode" at fi rst until the tem per a ture is below 50°C.
Turn the temperature control (16) to the blue fi eld for cold water and activate the spray handle until the
tem per a ture (17) is below 50°C.
Then turn off the water supply and stop the Honda engine by turning the start/stop button (18) to position
O
.
Close the petrol cock (pos. 19). (See instructions for the Honda engine).
Now the high pressure hose can be dismounted.
3.7 Transport
directions
For lifting by crane, use lifting straps!
When lifting the machine by forklift truck, be sure the forks extend completely under the machine to pre-
vent tipping. When lifting by tackle/crane a sling may be wrapped around the upper frame tubes (15) for
lifting.
Ensure that no persons are under or near the machine when lifting it.
Always fasten the machine securely during transport.
150
130
110
90
70
50
˚C
300
265
230
195
160
125
˚F
TEMP
˚C
140
130
110
90
150
120
100
80
70
50 60
40
30
16
19
18
17
15
15